新聞
聯系方式
服務熱線：0531-85980985
聯系人： 寧經理 手機：13953116782 電話：15990999232 郵箱：499589624@qq.com 地址：濟南市槐蔭區清河北路11號（美里新居南門斜對面）亞德森工廠店
熨燙工藝及常用的工具有哪些？
來源：http://www.lihwa.cn 日期：2022-01-10 發布人：
1.熨斗
1. Iron
熨斗是熨燙的主要工具，主要有三種：電熱熨斗、吊瓶蒸汽熨斗和全蒸汽熨斗。電熱熨斗和吊瓶蒸汽熨斗靠電熱絲發熱，可根據服裝面料不同的耐熱性來調節熨燙溫度，以防燙縮或燙焦。吊瓶蒸汽熨斗和全蒸汽熨斗是通過噴水板噴灑蒸汽，不同的是吊瓶蒸汽熨斗通過吊瓶供水，全蒸汽熨斗則是通過蒸汽發生器供水，因而全蒸汽熨斗也是熨燙效果更快、更好的，在服裝企業用得更多燙臺是與熨斗配合使用的。
Iron is the main tool for ironing. There are three kinds: electric iron, bottle steam iron and full steam iron. Electric iron and bottle steam iron are heated by electric heating wire. The ironing temperature can be adjusted according to the different heat resistance of clothing fabrics to prevent ironing shrinkage or scorching. The hanging bottle steam iron and the full steam iron spray steam through the water spray board. The difference is that the hanging bottle steam iron supplies water through the hanging bottle, and the full steam iron supplies water through the steam generator. Therefore, the full steam iron also has the fastest and best ironing effect. The ironing table most used in garment enterprises is used in conjunction with the iron.
2.燙臺
2. Ironing table
燙臺一般包括一個底板、一個形狀與底板相吻合的帶有聯動控制系統的可移動式頂板、燙氈、支架、臺面、儀表盤，人工或自動控制的蒸汽、抽真空及加熱和加壓裝置。熨燙臺可根據要求用于生產過程.中的熨燙和縫制完成后的整燙。
The ironing table generally includes a bottom plate, a movable top plate with linkage control system whose shape is consistent with the bottom plate, ironing felt, support, table, instrument panel, manually or automatically controlled steam, vacuum pumping, heating and pressurizing devices. The ironing table can be used in the production process according to requirements Ironing in and ironing after sewing.
3.噴水壺
3. Watering can
噴水壺主要用于小燙時的噴水，它能把水均勻且成霧狀噴灑在需要熨燙的部位，使熨燙效果更佳。
The water spraying kettle is mainly used for spraying water during small ironing. It can spray water evenly and in a fog on the parts to be ironed, so as to make the ironing effect better.
4.燙凳
4. Hot stool
燙凳一般為鐵凳，凳面鋪棉花，外包白棉布，并要求扎緊。熨燙中常用它燙肩縫、袖窿、褲襠等不能放平的部位。
The ironing stool is generally an iron stool. The stool surface is covered with cotton, wrapped with white cotton cloth, and tied tightly. In ironing, it is often used to iron shoulder seams, armholes, crotch and other parts that cannot be flattened.
5.燙饅
5. Steamed bread
燙饅又叫布饅頭，常用于熨燙服裝的胸、背、臀等豐滿并且突出的部位。
Ironing steamed bread, also known as cloth steamed bread, is often used to iron plump and prominent parts of clothing, such as chest, back and hip.
6.水布
6. Water cloth
水布通常用退過漿的白棉布。熨燙時，水布蓋在衣料之上，再用熨斗熨燙，以防衣料被燙臟、燙黃或燙出極光。
Water cloth is usually made of desized white cotton cloth. When ironing, the water cloth is covered on the clothes and then ironed with an iron to prevent the clothes from being dirty, yellow or aurora.
7.墊呢
7. Cushion
熨燙時，將其墊在衣物下面。一般用棉毯或吸水性好而且質地厚的線毯，上面再蓋一層白棉布作墊布。
When ironing, place it under your clothes. Generally, cotton blanket or thread blanket with good water absorption and thick quality is used, and a layer of white cotton cloth is covered on it as cushion cloth.
8.長燙凳
8. Long ironing stool
長燙凳用木料制成，凳面鋪少許棉花，稍厚，四周略薄，外包白棉布并且扎緊。其用于熨燙已縫制成圓筒形的縫，如褲子側縫，上衣袖縫等。
The long ironing stool is made of wood. The stool surface is covered with a little cotton. The center is slightly thicker and the four sides are slightly thinner. It is wrapped with white cotton cloth and tied tightly. The utility model is used for ironing the sewn cylindrical seam, such as the side seam of trousers, the sleeve seam of jacket, etc.
9.拱形木橋
9. Arched wooden bridge
拱形木橋是用木料鋸成的，其兩頭低，中間拱起成拱形，底面為平面。通常用于分燙半成品和袖縫等部位，也可用于呢料壓縫，使緝縫或止口平整且薄。
The arched wooden bridge is sawn with wood. Its two ends are low, the middle is arched, and the bottom is flat. It is usually used for ironing semi-finished products and sleeve seams. It can also be used for fabric pressing to make the seam or seam flat and thin.
感謝您的閱讀，此文的文章來源：濟南服裝廠更多的內容和問題請點擊：http://www.lihwa.cn我們會繼續努力的為您提供服務，感謝您的支持！
Thank you for reading. The source of this article: Jinan garment factory. For more information and questions, please click: http://www.lihwa.cn We will continue to work hard to provide you with services. Thank you for your support!
上一條：定做工裝的由什么決定的？ | 下一條：工作服面料選擇要注意什么？
資訊MORE+
- 濟南定制西裝制服職業裝，不可不知的注意事項 2025-09-19
- 濟南工裝定做：工裝定做的流程 2025-09-18
- 濟南工作服：工作服的設計不僅僅是舒服這么簡單！ 2025-09-17
- 濟南工裝定做：穿的整齊，人心才能齊！ 2025-09-16
- 濟南職業裝：職業裝搭配好了也能穿出時髦范兒 2025-09-13
- 濟南工作服：保安工作服管理辦法 2025-09-08
- 濟南工作服：企業定制員工工作服需要關注的四大 2025-08-30
- 濟南工作服定做：選對工裝工作效率翻倍 2025-08-24
- 濟南工作服定制：定制襯衫工作服驗收不再難 2025-08-23
- 工作服不合規？污染難控制?濟南工作服廠家亞美森為您解決 2025-08-09
- 濟南各行業工作服重量解析 2025-07-30
- 濟南服裝廠常用機械解析 2025-07-28
- 濟南工作服設計：行業風格的差異化體現 2025-07-25
- 濟南工作服開口大小設計方法：兼顧實用與地域適配性 2025-07-24
- 定制濟南工作服的時候要在意哪些問題？ 2025-07-23
- 濟南工作服設計需關注的核心要點 2025-07-22
- 濟南服裝廠夏季工作服：舒適面料 2025-07-21
- 濟南工作服定制廠家優勢解析 2025-07-18
- 濟南工作服制作流程要怎么實行？ 2025-07-16
- 濟南服裝廠定制有什么優勢？ 2025-07-14
