選用抗靜電劑對織物進行樹脂整理：

Using anti-static agents for resin finishing of fabrics:

經過浸軋、焙烘而粘附在合成纖維織物的表面，使織物具有一定的抗靜電效果。這種方法現在只用于民用服裝以克服衣服纏身、火花放電、污染吸灰等靜電現象。

After immersion rolling and baking, it adheres to the surface of synthetic fiber fabrics, giving the fabric a certain anti-static effect. This method is now only used for civilian clothing to overcome static phenomena such as entanglement, spark discharge, pollution, and dust absorption.

是在滌綸或錦綸聚合物的內部添加抗靜電劑：

Adding anti-static agents inside polyester or nylon polymers:

如磷酸脂、磺酸鹽等表面活性劑或引入第三單體以取得耐久性抗靜電纖維。由于添加劑的抗靜電劑大多數是遇堿會起反應或分解的表面活性劑，因此在織物整理或洗滌時忌用堿性洗滌劑，以防止影響抗靜電效果，這種纖維適宜作無塵服、無菌衣，也可用于民用服裝。

Surfactants such as phosphates and sulfonates, or the introduction of third monomers to achieve durable anti-static fibers. Due to the fact that most of the antistatic agents in additives are surfactants that react or decompose when exposed to alkali, alkaline detergents should not be used during fabric finishing or washing to prevent affecting the antistatic effect. This type of fiber is suitable for use as dust-free clothing, sterile clothing, and also for civilian clothing.

是在普通織物中混入導電纖維：

It is a mixture of conductive fibers in ordinary fabrics:

這種防靜電織物由于不受所在環境的影響，現已普遍被接受和認可。這種防靜電織物的抗靜電性能與導電纖維的種類和導電成分（金屬、石墨、炭黑等）在纖維中的分部情況，分為導電成分均一型、導電成分覆蓋型、導電成分復合型和導電成分混合型四種。其中含有炭黑、石墨等導電成分的其它復合型導電纖維可以直接用于織造的長絲，經紗中每隔一定間距（如1.5 cm左右）嵌入一根導電長絲，即可獲得很好的抗靜電效果，是目前用來織造防靜電工作服面料好的導電纖維。

This anti-static fabric is now widely accepted and recognized because it is not affected by its environment. The anti-static performance of this anti-static fabric is divided into four types based on the type of conductive fiber and the distribution of conductive components (metal, graphite, carbon black, etc.) in the fiber: uniform conductive component type, covered conductive component type, composite conductive component type, and mixed conductive component type. Other composite conductive fibers containing conductive components such as carbon black and graphite can be directly used for weaving long filaments. A conductive filament can be embedded in the warp yarn at certain intervals (such as about 1.5 cm) to achieve good anti-static effects. It is currently a good conductive fiber used for weaving anti-static workwear fabrics.