服裝生產作為勞動密集型產業，車間標準化建設直接關系到產品質量、生產效率及員工健康。濟南地區服裝廠遵循紡織行業規范，結合地方產業特性，構建起涵蓋環境、工藝、、質量的多維度生產標準體系。

　　As a labor-intensive industry, the standardization construction of workshops in clothing production is directly related to product quality, production efficiency, and employee health and safety. Jinan clothing factories follow national textile industry standards and combine local industrial characteristics to establish a multidimensional production standard system that covers environment, craftsmanship, safety, and quality.

　　一、車間環境與設施標準

　　1、 Workshop environment and facility standards

　　溫濕度控制：

　　Temperature and humidity control:

　　裁剪車間溫度保持在18-25℃，相對濕度45%-65%，防止面料因靜電吸附導致裁片偏移。

　　The cutting workshop maintains a temperature of 18-25 ℃ and a relative humidity of 45% -65% to prevent the fabric from deviating due to electrostatic adsorption.

　　縫制車間安裝工業級新風系統，每小時換氣次數不低于3次，確保CO?濃度低于1000ppm。

　　Install an industrial grade fresh air system in the sewing workshop, with a minimum of 3 air changes per hour, to ensure that the CO concentration is below 1000ppm.

　　照明與噪音管理：

　　Lighting and noise management:

　　工作面照度達500-750lx，采用LED燈具，色溫控制在4000K±200K，減少視覺疲勞。

　　The working face illumination reaches 500-750lx, using LED energy-saving lamps with color temperature controlled at 4000K ± 200K to reduce visual fatigue.

　　縫紉設備區噪音控制在85dB以下，通過安裝隔音罩與減震基座降低機械噪聲。

　　The noise level in the sewing equipment area is controlled below 85dB, and mechanical noise is reduced by installing soundproof covers and shock-absorbing bases.

　　生產布局優化：

　　Production layout optimization:

　　實行U型流水線布局，工序間物流距離縮短30%，減少在制品堆積。

　　Implement a U-shaped assembly line layout, shorten the logistics distance between processes by 30%, and reduce the accumulation of work in progress.

　　裁床區與縫制區設置隔離帶，防止粉塵交叉污染。

　　Set up isolation belts between the cutting and sewing areas to prevent dust cross contamination.

　　二、工藝與設備規范

　　2、 Process and equipment specifications

　　裁剪工藝標準：

　　Cutting process standard:

　　采用全自動鋪布機，鋪布層數誤差≤1%，搭配CAM自動裁床，裁片精度±1mm。

　　Adopting a fully automatic laying machine with a laying layer error of ≤ 1%, coupled with a CAM automatic cutting machine, the cutting accuracy is ± 1mm.

　　裁片編號使用耐水洗油墨，經預縮處理后仍保持清晰可讀。

　　The cutting number is printed with water-resistant ink and remains clear and readable even after pre shrinking treatment.

　　縫制設備要求：

　　Sewing equipment requirements:

　　平縫機轉速控制在3500-4000rpm，配備自動抬壓腳與倒縫功能，提升車工效率。

　　The speed of the flat sewing machine is controlled at 3500-4000rpm, equipped with automatic lifting feet and reverse sewing functions to improve the efficiency of the sewing process.

　　特種機臺（如鎖眼機、釘扣機）需通過CE認證，關鍵部位加裝防護罩。

　　Special machines (such as locksmith machines and nail fastening machines) need to pass CE certification, and safety protective covers should be installed on key parts.

　　整燙定型參數：

　　Ironing and shaping parameters:

　　蒸汽壓力控制在0.3-0.5MPa，燙臺表面溫度均勻性≤±2℃，防止面料極光損傷。

　　The steam pressure is controlled at 0.3-0.5MPa, and the surface temperature uniformity of the ironing table is ≤± 2 ℃ to prevent fabric damage from aurora.

　　西裝類產品采用立體整燙機，肩部、領部等部位尺寸偏差≤0.3cm。

　　Suit products use a three-dimensional ironing machine, with a size deviation of ≤ 0.3cm for the shoulders, collar, and other parts.

　　三、質量控制標準

　　3、 Quality Control Standards

　　原料檢驗流程：

　　Raw material inspection process:

　　面料到貨后進行四分制檢驗，疵點評分≤20分/百米，色牢度達4級以上。

　　After the fabric arrives, it undergoes a four point inspection, with a defect score of ≤ 20 points/100 meters and a color fastness of at least level 4.

　　輔料（拉鏈、紐扣）通過2000次開合測試，鹽霧試驗48小時無銹蝕。

　　Accessories (zippers, buttons) have passed 2000 opening and closing tests, and there is no corrosion after 48 hours of salt spray testing.

　　在線檢測機制：

　　Online detection mechanism:

　　縫制工序實施“三檢制”，即自檢、互檢、專檢，部位（如袖籠、領圈）縫跡密度≥9針/3cm。

　　The sewing process implements a "three inspection system", which includes self inspection, mutual inspection, and special inspection. The stitch density of key parts (such as sleeves and collars) is ≥ 9 stitches/3cm.

　　成品抽檢比例不低于5%，關鍵尺寸（如胸圍、衣長）偏差≤±1cm。

　　The sampling ratio of finished products shall not be less than 5%, and the deviation of key dimensions (such as chest circumference and clothing length) shall be ≤ ± 1cm.

　　追溯體系建立：

　　Establishment of traceability system:

　　每件成衣綁定條形碼，記錄生產日期、班組、質檢記錄等信息。

　　Each garment is bound with a unique barcode to record production date, team, quality inspection records, and other information.

　　留存關鍵工序影像資料，實現質量問題72小時快速追溯。

　　Retain key process image data to achieve rapid traceability of quality issues within 72 hours.

　　濟南服裝廠生產車間標準體系以精細化管理為核心，通過環境控制、設備升級、防護及質量追溯等措施，確保產品合格率穩定在98%以上。隨著智能制造技術的應用，如模板機、吊掛系統的普及，車間標準化水平正從“經驗驅動”向“數據驅動”轉型，為服裝產業高質量發展提供堅實支撐。

　　The standard system for the production workshop of Jinan Clothing Factory is centered on refined management, ensuring a stable product qualification rate of over 98% through measures such as environmental control, equipment upgrades, safety protection, and quality traceability. With the application of intelligent manufacturing technology, such as the popularization of template machines and hanging systems, the standardization level of workshops is shifting from "experience driven" to "data-driven", providing solid support for the high-quality development of the clothing industry.

　　本文由濟南服裝廠友情奉獻.更多有關的知識請點擊:http://www.lihwa.cn我們將會對您提出的疑問進行詳細的解答，歡迎您登錄網站留言.

　　This article is a friendly contribution from Shandong Work Clothes For more information, please click: http://www.lihwa.cn We will provide detailed answers to your questions. You are welcome to log in to our website and leave a message